Engineering for a Changing World : Proceedings; 59th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, September 11-15, 2017
Content
- 59, 2017, Nr. PL - A new V-Model for interdisciplinary product engineering
- 59, 2017, Nr. WS.4.06 - Modulare Elektronik zur digitalen Regelung von EMK-Systemen - Eigenschaften,...
- 59, 2017, Nr. WS.4.05 - Unsicherheitsbeiträge der Krafteinleitung bei der Kalibrierung der Federkonstanten...
- 59, 2017, Nr. WS.4.04 - Konstruktive Gestaltung des optimierten Positionier- und Kraftmesssystems...
- 59, 2017, Nr. WS.4.03 - Kalibrierung der Biegesteifigkeit von AFM-Cantilevern mit Kompensationswaagen
- 59, 2017, Nr. WS.4.02 - Große Ringlaser zur Vermessung der Erde
- 59, 2017, Nr. WS.4.01 - Neues hochauflösendes, miniaturisiertes und monolithisches Tiltmeter der...
- 59, 2017, Nr. WS.3.02 - SoC-based real-time passive stereo image processing implementation and...
- 59, 2017, Nr. WS.3.01 - Smart parallel spectral imager based on heterogeneous FPGA system on chip
- 59, 2017, Nr. WS.2.03 - Application of artificial neural networks for editing measured acoustical...
- 59, 2017, Nr. WS.2.02 - A method for efficient and task oriented configuration of Virtual Reality...
- 59, 2017, Nr. WS.2.01 - Human capture system for virtual reality applications
- 59, 2017, Nr. 5.05 - Development of an acceleration sensor incorporating a magneto-sensitive...
- 59, 2017, Nr. 5.04 - High temperature particle jet erosion of nickel- and cobalt-based alloys
- 59, 2017, Nr. 5.03 - A multiscale rheological model of superelastic metal alloys: from nano...
- 59, 2017, Nr. 5.02 - Design catalogue in a CAE environment for the illustration of tailored...
- 59, 2017, Nr. 5.01 - HFRR test method with stainless steel specimens for gasoline fuels
- 59, 2017, Nr. 4.2.05 - Product data management in the context of Industry 4.0
- 59, 2017, Nr. 4.2.04 - Endless diamond wire saw for monocrystalline silicon cutting
- 59, 2017, Nr. 4.2.03 - Design methodology for application-specific electromagnetic energy harvesters
- 59, 2017, Nr. 4.2.02 - Automatic optimization of load angles for a linear hybrid stepper motor
- 59, 2017, Nr. 4.2.01 - Experimental investigation of an efficient method for measuring turbocharger...
- 59, 2017, Nr. 4.1.02 - Creep and relaxation behavior of spring steel wires
- 59, 2017, Nr. 4.1.01 - Material selection method for composite springs
- 59, 2017, Nr. 3.3.P1 - Contour-independent design equations for the calculation of the rotational...
- 59, 2017, Nr. 3.3.06 - Model-based development of a compliant locomotion system for a small scout...
- 59, 2017, Nr. 3.3.05 - Stiffness investigation of pneumatic cylinders
- 59, 2017, Nr. 3.3.04 - Analytical model of conductive graphite foam based sensors characteristics
- 59, 2017, Nr. 3.3.03 - Stability bounds for systems and mechanisms in linear descriptor form
- 59, 2017, Nr. 3.3.02 - Analysis of the customized implantation process of a compliant mechanism...
- 59, 2017, Nr. 3.3.01 - Optimizing a biopsy needle using a simulation model
- 59, 2017, Nr. 3.2.P4 - Construction of a cilia inspired carriage system
- 59, 2017, Nr. 3.2.P3 - Investigations on the mechanical relevance of prominent vibrissa features...
- 59, 2017, Nr. 3.2.P2 - Automated cell cultivation and analysis: an approach for a user interface...
- 59, 2017, Nr. 3.2.P1 - Vibrissa-based design of tapered tactile sensors for object sensing
- 59, 2017, Nr. 3.2.11 - Aspects of functional electro-chemical biocompatibility in microsystems
- 59, 2017, Nr. 3.2.10 - Wireless system for breathing analysis during free-running locomotion in...
- 59, 2017, Nr. 3.2.09 - Identify pointing and waving in gesture based Human-Machine-Interaction
- 59, 2017, Nr. 3.2.08 - System for automated cell cultivation and analysis
- 59, 2017, Nr. 3.2.07 - Object contour sensing using artificial rotatable vibrissae
- 59, 2017, Nr. 3.2.06 - Characterizing the outer ear transfer function in dependence of interindividual...
- 59, 2017, Nr. 3.2.05 - Requirements and potentials of human kinetic energy harvesting technologies...
- 59, 2017, Nr. 3.2.04 - Multi-segmented artificial locomotion systems with adaptively controlled...
- 59, 2017, Nr. 3.2.03 - Control of compliant robotic systems with muscle-like actuators and saturated...
- 59, 2017, Nr. 3.2.02 - Kinematics of catching arms in insects: towards optimal design of robotic...
- 59, 2017, Nr. 3.2.01 - Kinetics of jumping regarding agility dogs
- 59, 2017, Nr. 3.1.P2 - Development of inspection system for tool presetter
- 59, 2017, Nr. 3.1.P1 - A parallel robot with three translational degrees of freedom for machining...
- 59, 2017, Nr. 3.1.07 - Control of a tower crane by means of algorithmic differentiation
- 59, 2017, Nr. 3.1.06 - Screw-driven robot for locomotion into sand
- 59, 2017, Nr. 3.1.05 - Miniaturized push-button rotational energy harvesting generator
- 59, 2017, Nr. 3.1.04 - Electromagnetic actuator of a gentle pump mechanism for blood transport
- 59, 2017, Nr. 3.1.03 - Development of a shape memory based air conditioning system
- 59, 2017, Nr. 3.1.02 - Approaches to the application of magnetic fluids in electromechanical drive...
- 59, 2017, Nr. 3.1.01 - Theoretical and experimental investigations of micro robots based on piezoelectric...
- 59, 2017, Nr. 2.3.P1 - Analysis and simulation of the melting behavior of polymer materials in...
- 59, 2017, Nr. 2.3.04 - Influence of fiber length in basalt fiber filled thermoplastics on mechanical...
- 59, 2017, Nr. 2.3.03 - Influence of fiber undulation on the mechanical properties of fiber reinforced...
- 59, 2017, Nr. 2.3.02 - Processing and quality of continuous fiber reinforced thermoplastic by...
- 59, 2017, Nr. 2.3.01 - Influence of flowability and MAH-content of maleated polyolefines on rheological...
- 59, 2017, Nr. 2.2.04 - FPGA implementation of a multi-view stereo approach for depth estimation...
- 59, 2017, Nr. 2.2.03 - 3D image acquisition and processing with high continuous data throughput...
- 59, 2017, Nr. 2.2.02 - Efficient description of the boundary of the object under observation
- 59, 2017, Nr. 2.2.01 - Using FPGA Block-RAM for fast white light interferometry
- 59, 2017, Nr. 2.1.P1 - An investigation for process capability in additive manufacturing
- 59, 2017, Nr. 2.1.04 - Wire- and powder laser cladding of Inconel® 625
- 59, 2017, Nr. 2.1.03 - Single item production within collaborative networks
- 59, 2017, Nr. 2.1.02 - Vibration analysis of a large rotor over industrial internet
- 59, 2017, Nr. 2.1.01 - Development of a robot-human-interface using an RGBD camera
- 59, 2017, Nr. 1.4.P1 - Flank wear measurement: a procedure proposal using computer vision techniques
- 59, 2017, Nr. 1.4.04 - Photometric data for the development of lighting components
- 59, 2017, Nr. 1.4.03 - Transmission volume holograms for LED illumination
- 59, 2017, Nr. 1.4.02 - Introduction to Fourier ptychographic imaging for 3D ToF cameras
- 59, 2017, Nr. 1.4.01 - Removal of optical aberrations caused by illumination system in Fourier...
- 59, 2017, Nr. 1.3.12 - Features of assembly and adjustment of lens objectives
- 59, 2017, Nr. 1.3.11 - Innovative freeform measurement method using two dimensional binary diffractive...
- 59, 2017, Nr. 1.3.10 - Nano-optical quarter-wave plates for applications in the visible wavelength...
- 59, 2017, Nr. 1.3.09 - High precision electron-beam-lithography for optical high performance applications
- 59, 2017, Nr. 1.3.08 - See-through near to eye displays: challenges and solution paths
- 59, 2017, Nr. 1.3.07 - On the influence of the flexure hinge orientation in planar compliant mechanisms...
- 59, 2017, Nr. 1.3.06 - Accuracy improvement in diameter measurement of micro-sphere based on whispering...
- 59, 2017, Nr. 1.3.05 - Evaluation strategy of spheroidal distortion for micro-sphere based on...
- 59, 2017, Nr. 1.3.04 - Optical scheme of small-size curved detector spectrofluorometer
- 59, 2017, Nr. 1.3.03 - Qualification of silane coatings for the strength enhancement of concrete...
- 59, 2017, Nr. 1.3.02 - Motorized measurement device for automatic registration of cutting edges
- 59, 2017, Nr. 1.3.01 - Design of high-precision weighing cells based on static analysis
- 59, 2017, Nr. 1.2.P4 - Problems of metrological verification of software for modern measuring...
- 59, 2017, Nr. 1.2.P3 - Extending the HSRI tyre model for large inflation pressure changes
- 59, 2017, Nr. 1.2.P2 - I-T converting element of quantum temperature standard
- 59, 2017, Nr. 1.2.P1 - Impedance analyser error correction using artificial neural networks
- 59, 2017, Nr. 1.2.09 - High accuracy temperature measurement and monitoring of flow parameters...
- 59, 2017, Nr. 1.2.08 - Enhanced measurement routine for optical 3D geometry measurement of hot...
- 59, 2017, Nr. 1.2.07 - A self-calibrating multicomponent force/torque measuring system
- 59, 2017, Nr. 1.2.06 - Calibration of the torsion force measurement system for the Lorentz force...
- 59, 2017, Nr. 1.2.05 - Investigations on motion deviations of an EMFC balance
- 59, 2017, Nr. 1.2.04 - The virtual weight
- 59, 2017, Nr. 1.2.03 - Dissemination of the « Planck-Kilogram »
- 59, 2017, Nr. 1.2.02 - Magnet system for the Planck-balance
- 59, 2017, Nr. 1.2.01 - The Planck-Balance – a self-calibrating precision balance for industrial...
- 59, 2017, Nr. 1.1.P3 - Optimization of the optical parameters in Fabry-Perot interferometer
- 59, 2017, Nr. 1.1.P2 - FPGA-based signal processing of a heterodyne interferometer
- 59, 2017, Nr. 1.1.P1 - Alternative evaluation methods for roundness measurements
- 59, 2017, Nr. 1.1.16 - Using Monte Carlo simulation for estimation of uncertainty of four point...
- 59, 2017, Nr. 1.1.15 - Traceable measurement of large gears with micron accuracy
- 59, 2017, Nr. 1.1.14 - Dynamic alignment and calibration of linear axes
- 59, 2017, Nr. 1.1.13 - Low-frequency micro/nano-vibration generator using a piezoelectric actuator
- 59, 2017, Nr. 1.1.12 - A new approach for holistic thread profile determination supported by optical...
- 59, 2017, Nr. 1.1.11 - Pattern sequences for fast absolute phase retrieval with application in...
- 59, 2017, Nr. 1.1.10 - 3D reconstruction and characterization of the porous microstructure of...
- 59, 2017, Nr. 1.1.09 - Automatic calibration system for micro-displacement devices
- 59, 2017, Nr. 1.1.08 - Evaluation of a focused laser spot diameter for an optical angle sensor
- 59, 2017, Nr. 1.1.07 - On the characterization of ultra-precise VUV-focusing mirrors by means...
- 59, 2017, Nr. 1.1.06 - A straightness measuring interferometer characterised with different wedge...
- 59, 2017, Nr. 1.1.05 - Development of an integrated guiding and actuation element for high dynamic...
- 59, 2017, Nr. 1.1.04 - Combination of a fast white light interferometer with a phase-shifting...
- 59, 2017, Nr. 1.1.03 - A contribution to the implementation of ultraprecision rotations for multiaxial...
- 59, 2017, Nr. 1.1.02 - Using artificial neural networks to study the dynamics of positioning systems
- 59, 2017, Nr. 1.1.01 - Fast and accurate: high-speed metrological large range AFM for surface...
Preview
Cite
Citation style:
Engineering for a Changing World. Proceedings; 59th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, September 11-15, 2017. Ilmenau 2017.
Access Statistic
Rights
Use and reproduction:
All rights reserved