Shaping the Future by Engineering : Proceedings ; 58th IWK, Ilmenau Scientific Colloquium, Technische Universität Ilmenau, 8 - 12 September 2014

Content

• Water-cooled small volume light weight motors

  Jahn, Simon; Dahms, Steffen; Gemse, Felix; Sändig, Sabine; Köhring, Pierre; Voigt, Hartmut

• Waschen von Floatglas

  Emonds, Michael

• Thermometry fixed points based on binary eutectic alloys

  Rudtsch, Steffen

• Thermo couples for temperature measurement and control near room temperature

  Flügge, Jens; Voigt, Michael; Drung, Dietmar

• The influence of material properties on rotary draw bending processes

  Engel, Bernd; Hassan, Hassan Raheem

• Picometer resolution heterodyne interferometry for short to medium term dimensional stability measurments

  Nes, Arthur S. van de; Voigt, Dirk

• Glass corrosion effects from dishwashing and their technical solution

  Werner, Dirk

• Extruded films of bio-based plastics for packaging applications

  Svidler, Rostislav; Hartmann, Tobias; Buschbeck, Sebastian; Rinberg, Roman; Kroll, Lothar

• Energy saving potentials in the single screw extrusion through the cooling of the feed zone

  Sanne, Dmitrij

• Absolute interferometric measurement of the dimensional and thermal stability of joning techniques

  Lorenz, Hagen; Schödel, René

• A quick-test method based on acoustic emission for the in-process characterization of conventional grinding wheels

  Boaron, Adriano; Weingaertner, Walter Lindolfo; Uhlmann, Eckart

• The mechanics of carpal vibrissae of rattus norvegicus during substrate contact

  Helbig, Thomas; Voges, Danja; Niederschuh, Sandra; Schmidt, Manuela; Witte, Hartmut

• The cilia field as a paragon for technical macro transport

  Voges, Danja; Fremerey, Maximilian; Hörnschemeyer, Dorothee; Krekeler, Malte; Schomburg, Karsten; Schilling, Cornelius; Witte, Hartmut

• State of the art barriers in validation of digital mock-ups in immersive virtual environments

  Wall, Konstantin; Tomaszek-Staude, Wilm; Pöschl, Sandra; Döring, Nicola

• Reduction of thermal effects on precise dimensional measurements

  Schalles, Marc; Flügge, Jens; Köning, Rainer

• Novel honeycomb sandwich structures with fiber reinforced face sheets

  Reußmann, Thomas; Oberländer, Eric

• Mechanisms and sources of spring-in and spring-back of fiber reinforced thermoplastics

  Engel, Bernd; Brühmann, Jasmin

• Determination of the near-field-acoustics of primary vehicle sound sources in relation to indoor pass-by noise testing for the verification of a virtual acoustic vehicle model

  Albers, Albert; Landes, David; Behrendt, Matthias; Weber, Christian; Siegel, Antje; Husung, Stephan

• Design of a phase-shifting double-wheg-module for quadruped robots

  Fremerey, Maximilian; Köhring, Sebastian; Nassar, Omar; Schöne, Manuel; Weinmeister, Karl; Becker, Felix; Đorđević, Goran; Witte, Hartmut

• Biological structures and technical design - a bio-mimetic approach

  Schilling, Cornelius

• The influence of fiber undulation on the mechanical properties of FRP-laminates

  Fiebig, Christian; Koch, Michael

• Studies of design and technology influence on optical properties of injection molding parts by simulation

  Yablochnikov, Evgeny I.; Pirogov, Alexander V.; Vasilkov, Sergey D.; Andreev, Y. S.; Barvinsky, Igor A.

• Simulation of the resin transfer molding process (RTM) by analysis of the process fundamentals

  Caba, Stefan; Koch, Michael

• Simulation of acoustical properties of technical systems using a network-based sound-server

  Siegel, Antje; Husung, Stephan; Weber, Christian; Albers, Albert; Landes, David; Behrendt, Matthias

• Process parameters affecting the quality of functionalized in-mold decoration injection molded composites

  Woyan, Felix; Koch, Michael; Schneidmadel, Stefan

• Oxygen and water vapor permeability and required layer thickness for barrier packaging

  Simon, Christian; Türk, Marko; Koch, Michael

• Manufacturing hybrid lightweight compounds of closed-cell aluminium foam and thermosoftening plastics in injection moulding processes

  Steffen, Maik Eno; Koch, Michael

• Machining of CFRP: drilling and milling of unstable work pieces

  Lissek, Fabian; Kaufeld, Michael; Bergmann, Jean Pierre

• Integration of connecting elements in hybrid-composite components

  Röder, Martin; Koch, Michael

• Inline infrared thermography applied for quality gates and for mould temperature control in the injection moulding process

  Schwalme, Georg

• Improvement of tribological properties of plastic compounds

  Bruchmüller, Matthias; Koch, Michael

• Human factors in IVE development - a case study for virtual fear of public speaking training

  Pöschl, Sandra; Tudor, Ana-Despina; Döring, Nicola

• High pressure capillary rheometry on wood plastic composites with variation of wood content and matrix polymer

  Laufer, Nico; Hansmann, Harald; Koch, Michael

• Glass fiber multilayer construction for textile reinforced injection molded structures

  Tröltzsch, Jürgen; Helbig, Frank; Kroll, Lothar

• Experimental investigations on injection molded parts of mechanically recycled offcuts from the production of continuous fiber-reinforced thermoplastic sheets

  Moritzer, Elmar; Heiderich, Gilmar

• Electrical steel stacks for traction motors - fundamental investigations on the weldability

  Schade, Till; Pflomm, J.; Shakirov, D.; Bergmann, Jean Pierre

• CFRP and aluminum foam hybrid composites

  Hartmann, Robert; Koch, Michael

• Bending of unidirectional reinforced thermoplastics

  Engel, Bernd; Soemer, Evelyne; Böcking, Jan

• Adaptive process control in injection molding

  Heinzler, Felix A.; Wortberg, Johannes

• Characteristics of a compliant fluid-mechanical actuator for creating a screw motion - comparison of simulation and measurement results

  Griebel, Stefan; Feierabend, Martin; Bojtos, Attila; Zentner, Lena

• TPE-modification of wood plastic compounds for advanced rheological and impact properties

  Hartmann, Tobias; Bürgermeister, Sona; Rinberg, Roman; Kroll, Lothar

• Stretching of polycarbonate

  Wibbeke, Andrea; Pohl, Max; Schöppner, Volker

• Simulation and comparison of the pressure profile of fumigated and non-fumigated polymer melts

  Langlotz, Martin; Koch, Michael

• Range prediction of electric vehicles

  Schreiber, Viktor; Wodtke, Axel; Augsburg, Klaus

• Interface properties of injection molded biopolymers

  Schwind, Michael; Tautenhain, Florian; Hartmann, Tobias; Rinberg, Roman; Kroll, Lothar

• Influences with regard to the processing of conductive polymers

  Schneidmadel, Stefan; Koch, Michael; Woyan, Felix

• Dynamic tire pressure control system - analysis of the effect to longitudinal vehicle dynamics and fuel consumption

  Höpping, Kristian; Augsburg, Klaus

• Analysis of the process behavior for planetary roller extruders

  Rudloff, Johannes; Lang, Marieluise; Kretschmer, Karsten; Heidenmeyer, Peter; Bastian, Martin; Koch, Michael

• An approach to lower the particle emission of friction brakes on vehicles

  Sachse, Hannes; Augsburg, Klaus; Ivanov, Valentin; Trautmann, Carsten; Egenhofer, Frederic

• Tribological behavior and tribological model of shot-peened helical spring wires

  Gevorgyan, Vahan; Kletzin, Ulf

• Specific curvature behavior of compliant mechanism with hydraulic activation used for medical instruments or implants

  Issa, Mirna; Hügl, Silke; Rau, Thomas S.; Majdani, Omid; Zentner, Lena

• Sensor elements made of conductive silicone rubber for a compliant gripper

  Issa, Mirna; Zentner, Lena

• Properties of torsion springs before and after heat treatment

  Geinitz, Veronika; Kletzin, Ulf

• Optimal design of adaptive compliant mechanisms with inherent actuators comparing discrete structures with continuum structures incorporating flexure hinges

  Milojević, Andrija; Linß, Sebastian; Zentner, Lena; Pavlović, Nenad T.; Pavlović, Nenad D.; Petrović, Tomislav; Milošević, Miloš; Tomić, Miša

• Modeling and investigation of spring clip mechanisms and applications in precision engineering

  Hartmann, Lars; Zentner, Lena

• Measurement tools and strategies to improve stability in metal cutting

  Bendahhou, Abdessamad; Zentner, Lena

• Long-term stability of patented cold drawn steel wires

  Lux, Rüdiger; Kletzin, Ulf; Geinitz, Veronika; Beyer, Peter

• Hammering beneath the surface of Mars - modeling and simulation of the impact-driven locomotion of the HP 3 -Mole by coupling enhanced multi-body dynamics and discrete element method

  Lichtenheldt, Roy; Schäfer, Bernd; Krömer, Olaf

• Geometry- and functional principle improvements of high-temperature thermocouples for in-engine measuring points from the viewpoint of the flow and life optimization

  Wodtke, Axel; Augsburg, Klaus

• Experimental and theoretical study on high-temperature connection techniques of thermoelectric materials

  Lämmle, Christopher; Karcher, Christian

• Compliant shear force sensor

  Chaykina, Alexandra; Griebel, Stefan; Zentner, Lena

• Approaches on material analysis and modeling of bouncing putty

  Hartmann, Lars; Reich, René; Kletzin, Ulf; Zentner, Lena

• Analysis of supports of a three-legged compliant snap-through structure for application in an excess flow valve

  Hartmann, Lars; Opfermann, Ronald; Zentner, Lena

• Wear, friction coefficient and slip property estimation of sliding friction parts

  Linins, Oskars; Lungevics, Janis

• Virtual engineering application for modeling the flexible machine station at the order handled manufacturing system

  Bargelis, Algirdas; Baltrušaitis, Alfredas; Stasiškis, Andrius

• Development of working structures with a focus on lightweight design

  Posner, Benedikt; Binz, Hansgeorg; Roth, Daniel

• Design and FE calculations of a lightweight civil unmanned air vehicle

  Pitatzis, Nikolaos D.; Savaidis, George; Panagiotou, Periklis; Yakinthos, Kyriakos

• Challenges of the sizing of ballscrews for their use in the primary flight control system of a helicopter

  Münzing, Thomas; Binz, Hansgeorg

• An approach for a model based development process of cybertronic systems

  Eigner, Martin; Muggeo, Christian; Dickopf, Thomas; Faißt, Karl-Gerhard

• A first inherently pulsation free peristaltic pump

  Hoffmeier, Konrad L.; Hoffmann, Dirk; Feller, Karl-Heinz

• Transversal vibrations of beams in context of vibrassae consisting of foundations, discrete supports and various sections

  Baldeweg, Daniel; Will, Christoph; Behn, Carsten

• Technical, non-visual characterization of substrate contact using carpal vibrissae as a biological model: an overview

  Schmidt, Manuela; Witte, Hartmut; Zimmermann, Klaus; Niederschuh, Sandra; Helbig, Thomas; Voges, Danja; Husung, Isabel; Volkova, Tatiana; Will, Christoph; Behn, Carsten

• Spy bristle bot - a vibration-driven robot for the inspection of pipelines

  Becker, Felix; Börner, Simon; Kästner, Tobias; Lysenko, Victor; Zeidis, Igor; Zimmermann, Klaus

• Quasi-static object scanning using technical vibrissae

  Will, Christoph; Steigenberger, Joachim; Behn, Carsten

• Design for quality in the concept generation phase of the product design process

  Arunachalam, Ramanathan; Zahid Qamar, Sayyad; Said Al Shidhani, Ahmed; Saud Al Musallami, Ali; Saif Al Hadrami, Mohammed

• Contribution to snake-like locomotion: mechanical and mathematical models

  Heinz, Leo; Krüger, Martin; Behn, Carsten

• Considering the design of the flexure hinge contour for the synthesis of compliant linkage mechanisms

  Linß, Sebastian; Milojevic, Andrija; Zentner, Lena

• Concept of modelling the Failure Mode Effects Analysis (FMEA) on the base of Characteristics-Properties Modelling (CPM)

  Crostack, Alexander; Binz, Hansgeorg; Roth, Daniel

• Competition of innovation - realization by „Consistent R&D“

  Lasch, Thorsten

• Characterization of the elasto-kinematic behavior of generalized cross-spring bearings

  Gonçalves, Luis Antonio; Bitencourt, Antonio Carlos Peixoto; Theska, René; Lepikson, Herman Augusto

• Adaptive compliant gripper finger with embedded extending actuators

  Milojević, Andrija; Pavlović, Nenad D.; Pavlović, Nenad P.

• A joint with tunable compliance for a change of locomotion patterns

  Fremerey, Maximilian; Witte, Hartmut

• Risk perception of the elderly - analyzing the adoption of innovative mobility systems

  Pezoldt, Kerstin; Michaelis, Anne

• Range estimation system for powered wheelchairs

  Fränzel, Norbert; Schroeder, Thekla; Weichert, Frank; Weiskopf, André; Wenzel, Andreas; Ament, Christoph

• Innovative cooling and compression system to decrease swellings on fractures at extremities

  Päßler, Annekathrin; Nagel, Thomas

• Control and evaluation on powered assistive systems for standing-up motion

  Iida, Chika; Suzuki, Ryoichi; Kobayashi, Nobuaki; Toyouchi, Atsushi; Toriyabe, Tatsuru

• Combining learning classifier systems with the decision theory for creating a smart home system

  Döbel, Christian

• An attempt to objectively determine part of the key indicator method using the Kinect® camera

  Suzaly, Nuha; Nowack, Tobias; Sprenger, Sina; Kurtz, Peter

• A description of the dynamics of a four-wheel Mecanum mobile system as a basis for a platform concept for special purpose vehicles for disabled persons

  Abdelrahman, Mohamed; Zeidis, Igor; Bondarev, Olga; Adamov, B.; Becker, Felix; Zimmermann, Klaus

• Wheg-module with electromagnetic spokes

  Nassar, Omar; Fremerey, Maximilian; Abdelhameed, Magdy M.; Tolbah, Farid A.; Witte, Hartmut

• Silver-Mobility - near field mobility concepts for the age group 50+

  Lutherdt, Stefan; Becker, Felix; Brandl, Michael; Faenger, Bernd; Fränzel, Norbert; Fremerey, Maximilian; Köhring, Sebastian; Lawin, Meike; Michaelis, Anne; Weichert, Frank

• Pipeline inspection robot

  Marangoni, Rafael R.; Baron, Raphael

• Low-cost piezoelectric actuators - analytical, numerical and experimental studies with a focus on mobile robotics

  Becker, Felix; Börner, Simon; James, Emmanuel; Minchenya, Vladimir; Zimmermann, Klaus

• Imaging sensor system with wireless data transmission for in-process measurements in the machining area of milling centers

  Schellhorn, Mathias; Preißler, Marc; Hoffmann, Rolf; Linß, Gerhard

• Fuzzy-adapted lane assist of vehicles with uncertainties

  Noll, Andreas; Behn, Carsten

• Energy efficient light modulation for multispectral imaging

  Rosenberger, Maik; Rilk, Johannes; Fütterer, Richard; Linß, Gerhard; Lawin, Meike

• Dynamical behavior of window regulator systems

  Zhao, Xin; Petkun, Sergey; Zeidis, Igor; Zimmermann, Klaus

• Complexity of mechatronic systems on example of mobile robots

  Schale, Florian; Braunschweig, Marion; Frank, Sebastian

• An ear-pinna acoustic analysis coupled with an ear-canal emulator 711

  Bances, Enrique; Schmidt, Tobias; Helbig, Thomas; Witte, Hartmut

• An approach to magnetically actuated miniaturized compliant locomotion systems

  Kaufhold, Tobias; Böhm, Valter; Zeidis, Igor; Zimmermann, Klaus

• A wheg-axle-tracking mechanism for passenger transport purposes

  Köhring, Sebastian; Lutherdt, Stefan; Fremerey, Maximilian; Witte, Hartmut

• A cascaded worm-like locomotion system - constructive design, software and experimental environment

  Gorges, Stephan; Riehs, Christopher; Zimmermann, Klaus; Kästner, Tobias

• Symbolic derivation of control models for nonholonomic mechanical systems

  Sanjuan Szklarz, Paweł Cesar; Jarzebowska, Elzbieta

• SICALT - spectral image correction and analysis tool

  Schwannecke, Hans-Christian; Fütterer, Richard; Rosenberger, Maik; Linß, Gerhard

• Regularity of dynamic visual acuity change in the training results

  Rottc, Iuliia; Musalimov, Victor

• Nonlinear control of complex systems using algorithmic differentiation

  Röbenack, Klaus; Winkler, Jan; Franke, Mirko

• Multichannel sorting of food based on image processing

  Brückner, Peter; Lemanzyk, Thomas; Schlegel, Alexander; Weber, Günther

• Mechatronic system for bulldozer’s intellectual control

  Bulgakov, Alexey G.; Tokamakov, Georgy

• Interferometrical determination of concentric run-out errors in rotary tables for optical roundness measurement

  Ullmann, Vinzenz; Kühnel, Michael; Manske, Eberhard

• Hyper- and multispectral imaging systems - a survey of different approaches at the Ilmenau University of Technology

  Rosenberger, Maik; Correns, Martin; Fütterer, Richard; Linß, Gerhard; Manske, Eberhard; Fröhlich, Thomas; Grewe, Adrian; Hillenbrand, Matthias; Sinzinger, Stefan

• Global descriptors application in object recognition

  Kupriyanov, Dmitry; Shvarts, Dmitry; Musalimov, Victor; Tamre, Mart

• Energy efficiency measures for drive cooling system of a machine tool by use of physical simulation models

  Kirchner, Henry; Rehm, Matthias; Quellmalz, Johannes; Schlegel, Holger

• Automatization the 3D reconstruction of the building model using 2D images

  Bulgakov, Alexey G.; Evgenov, Alexey

• Acceleration of image restoration algorithms for dynamic measurements in coordinate metrology by using OpenCV GPU framework

  Holder, Silvio; Linß, Gerhard

• Miniaturized AMD vision aids: principles and realization

  Hillenbrand, Matthias; Mitschunas, Beate; Hoffmann, Daniela; Grewe, Adrian; Hinz, Susanne; Feßer, Patrick; Sinzinger, Stefan

• Concrete - future material for high precision machines

  Hahm, Christoph; Theska, René; Flohr, Alexander; Dimmig-Osburg, Andrea; Hartmann, O.

• Vectorial tolerances for the uncertainty analysis of precision measurement devices

  Geis, Annika; Husung, Stephan; Weber, Christian; Füßl, Roland; Manske, Eberhard

• The influence of the contact force in dilatometry: force-controlled measuring cells in dilatometry

  Wohlfahrt, Fabian; Theska, René

• The influence of polarisation changes introduced by deflecting elements to interferometric measurements

  John, Kerstin; Theska, René; Manske, Eberhard; Büchner, Hans-Joachim

• Study of otimal algorithm for distance measurements in computer vision

  Costa, Pedro Bastos; Leta, Fabiana Rodrigues; Barros, Wellington Santos; Ribeiro, Michele Fernandes Lemos; Baldner, Felipe de Oliveira; Gomes, Juliana Freitas Santos

• Imaging systems with Alvarez-Lohmann lenses

  Grewe, Adrian; Sinzinger, Stefan

• High-precision analog interfaces for low-latency PC-in-the-loop controller

  Krapf, Gunter; Schwesinger, Folker; Fröhlich, Thomas

• Dual axis tiltmeter with nanorad resolution based on commercial force compensation weigh cells

  Kühnel, Michael; Rivero, Michel; Diethold, Christian; Hilbrunner, Falko; Fröhlich, Thomas

• Approaches to cost-effective manufacturing of precision aspheres

  Scheibe, Hannes; Theska, René

• Adjustment and evaluation of incremental optical rotary encoders

  Smirnov, N. V.; Latyev, Svjatoslav M.; Theska, René

• Adaptive Kalman filter for active magnetic bearings using softcomputing

  Li, Li; Kästner, Wolfgang; Worlitz, Frank

• Quality assurance with digital learning equipment for mobile smart photonic dimensional, color and spectral measurements

  Höfner, Dieter; Dittrich, Paul-Gerald; Kraus, Daniel; Hofmann, Dietrich

• PC-based low latency controller for dynamic mechatronic systems

  Schwesinger, Folker; Krapf, Gunter; Fröhlich, Thomas

• New proposals for the dynamic tests of torque transducers

  Oliveira, Rafael S.; Lepikson, Herman Augusto; Bitencourt, Antonio Carlos Peixoto; Machado, Raphael R.; Winter, Simon; Theska, René; Fröhlich, Thomas

• Extraction of the motion indications in the sequence of images

  Mitsiukhin, A.

• Dynamic characterization of a multi-component force transducer using a Lorentz force load changer

  Schleichert, Jan; Carlstedt, Matthias; Marangoni, Rafael; Rahneberg, Ilko; Fröhlich, Thomas

• Capacitive sensor technology based on area variation for precise position detection

  Pufke, Michael; Hilbrunner, Falko; Diethold, Christian; Fröhlich, Thomas

• Application of a multi-degree-of-freedom sensor in local Lorentz force velocimetry using a small-size permanent magnet system

  Hernández, Daniel; Karcher, Christian; Thess, Andre

• Analysis, physically motivated modeling and system identification of electromagnetic force compensated balances (EMFC)

  Amthor, Arvid; Kaiser, Irina; Rogge, Norbert; Weiß, Heiko

• Tilted Wave Interferometer - design and test

  Lotz, Markus; Siepmann, Jens; Mühlig, Stefan; Jung, S.; Baer, Goran

• Thin-film capable ceramics for humidity and temperature sensing applications

  Goj, Boris; Brokmann, Ulrike; Bartsch, Heike; Rädlein, Edda; Müller, Jens

• Secret aspects of future engineering

  Nordhoff, Wilfried

• Quality assurance with spectrometer hardware apps for mobile smart photonic spectral measurements

  Kraus, Daniel; Dittrich, Paul-Gerald; Höfner, Dieter; Hofmann, Dietrich

• Quality assurance with calibration tools for mobile smart photonic dimensional, color and spectral measurement systems

  Dittrich, Paul-Gerald; Höfner, Dieter; Kraus, Daniel; Hofmann, Dietrich

• Hygrostat based on adsorption processes controlled by a high precision chilled dew point mirror

  Rogge, Norbert; Engwicht, Michael; Welsch, Steffen; Hilbrunner, Falko; Fröhlich, Thomas

• Force measurements by strain gauge sensors as part of time-of-flight flow rate control

  Dubovikova, Nataliia; Karcher, Christian; Resagk, Christian

• Development of a force displacement measurement device for the determination of spring constants

  Diethold, Christian; Kühnel, Michael; Fröhlich, Thomas

• Contact materials for mass artifacts

  Rahneberg, Ilko; Fröhlich, Thomas

• Calibration of heat flux sensors with small heat fluxes

  Hohmann, Michael; Breitkreutz, Paul; Schalles, Marc; Fröhlich, Thomas

• A self-optimizing framework for developing metrology software on massive parallel processor architectures

  Beier, Tobias

• Refractivity compensated tracking interferometer for precision engineering

  Meiners-Hagen, Karl; Pollinger, Florian; Prellinger, Günther; Rost, Kerstin; Wendt, Klaus; Pöschel, Wolfgang; Dontsov, Denys; Schott, Walter; Mandryka, Viktor

• Metrological optimazition of thermocouples for exhaust metering

  Garbers, Johannes; Gehrmann, Stephan; Augustin, Silke; Fröhlich, Thomas; Irrgang, Klaus; Lippmann, Lutz

• Investigations on the damping properties of vacuum-compatible aerostatic journal gas bearing elements

  Heidler, Nils; Holub, Tobias; Risse, Stefan; Eberhardt, Ramona

• Insert with a multiple fixed-point cell for a dry block calibrator

  Marin, Sebastian; Hohmann, Michael; Schalles, Marc; Krapf, Gunter; Fröhlich, Thomas

• Development of mirror cells for a satellite born solar telescope

  Bischoff, Jörg; Grauf, Bianca; Staub, Jan; Gandorfer, Achim; Woch, Joachim; Clark, S.; Zimmermann, Marcus; Kolb, A.; Metz, B.; Rucks, Peter

• State standard of electrical resistance on the basis of von Klitzing constant

  Stadnyk, Bohdan; Yatsyshyn, Svyatoslav

• New material standards for traceability of roundness measurements of large scale rotors

  Widmaier, Thomas; Kuosmanen, Petri; Hemming, Björn; Esala, Veli-Pekka; Brabandt, Daniel; Haikio, Janne

• Investigation on process induced nano scale shape deviations of DUV tungsten wire grid polarizer

  Siefke, Thomas; Voigt, Daniel; Puffky, Oliver; Kley, Ernst-Bernhard

• Influence of the air buoyancy correction to the uncertainty of mass comparisons

  Hilbrunner, Falko; Fehling, Thomas; Mühlich, Sigo; Schreiber, Mario

• Dual fiber-coupled laser hygrometer for fast in-situ gas analysis with minimized absorption path length

  Klein, Alexander; Ebert, Volker

• Characterization of non-dispersive infrared gas detection system for multi gas applications

  Silinskas, Mindaugas; Mikuta, Reinhard; Bourouis, R.; Kloos, Sven M.; Burte, Edmund P.

• Calibrating slender thermocouples oneself

  Lehmann, Harald

• Tilted wave interferometer – improved measurement uncertainty

  Mühlig, Stefan; Siepmann, Jens; Lotz, Markus; Jung, S.; Schindler, Johannes; Baer, Goran

• Thermovoltages under consideration of the thermal expansion

  Irrgang, Klaus

• Review of the structure and the principle of work of nuclear quadrupole resonance thermometer

  Stadnyk, Bohdan; Volyskyi, Rostyslav

• Improvement of metrological characteristics of portable impedance analyzers

  Stadnyk, Bohdan; Fröhlich, Thomas; Khoma, Yuriy

• Evaluation of stability of system with neural controller

  Hirnyak, Yu.; Ivakhiv, Orest; Nakonechnyi, M.; Repetylo, Taras

• Combined optical sensor for 3D geometry and roughness measurement

  Büchner, Marco; Nehse, Uwe; Lotz, Markus; Uhlrich, Günter; Kühmstedt, Peter; Schröder, Sven; Hauptvogel, Matthias

• Use of phase inversion points of the light field for angular displacement measurement

  Ivanov, Alexander Nikolaevich; Nosova, Maryana Dmitrievna

• Tidal earth crust deformation measurements

  Dontsov, Denys; Pöschel, Wolfgang; Schott, Walter; Kukowski, Nina; Jahr, Thomas; Schindler, Peter

• Signal interpolation method for quadrature phase-shifted Fabry-Perot interferometer

  Wang, Yung-Cheng; Shuyu, Lih-Horng; Chang, Chung-Ping; Manske, Eberhard

• Scan performance of nanopositioning systems with large travel range

  Hesse, Steffen; Schäffel, Christoph; Zschäck, Stephan; Ament, Christoph; Müller, Andreas; Manske, Eberhard

• Positioning with nanometre precision requires a high tech Nanopositioning and Nanomeasuring Machine and an optimal machine setup

  Fiedler, Bernd; Gerlach, Erik; Husung, Isabel; Zeidis, Igor; Zimmermann, Klaus; Füßl, Roland; Manske, Eberhard; Hausotte, Tino; Theska, René

• High-resolution fiber-coupled interferometric point sensor for micro- and nano-metrology

  Schake, Markus; Schulz, Markus; Lehmann, Peter

• Field programmable gate array based digital lock-in amplifier for highest resolution heterodyne interferometer

  Strube, Sebastian; Molnar, Gabor; Danzebrink, Hans-Ulrich

• Digital beat frequency control of an offset-locked laser system

  Köchert, Paul; Weichert, Christoph; Flügge, Jens; Wurmus, Jens; Manske, Eberhard

• Detection of subsurface damage in optical transparent materials using short coherence tomography

  Börret, Rainer; Wiedemann, Dominik; Kelm, Andreas

• A compact tactile surface profiler for multi-sensor applications in nano measuring machines

  Hofmann, Norbert; Mastylo, Rostyslav; Manske, Eberhard; Theska, René

• Stability of a fully fibre-coupled interferometer

  Weichert, Christoph; Köchert, Paul; Köning, Rainer; Flügge, Jens

• Challenges and trends in manufacturing metrology – VDI/VDE roadmap

  Imkamp, Dietrich; Gabbia, Alessandro; Berthold, Jürgen

• Ongoing trends in precision metrology

  Manske, Eberhard; Füßl, Roland; Mastylo, Rostyslav; Vorbringer-Dorozhovets, Nataliya; Birli, Oliver; Jäger, Gerd

• Self-volumetric error compensation of a developed Micro-CMM

  Fan, Kuang-Chao; Hsu, Shih-Hsin; Zhou, Hao

• Markers for referencing topography measurement data of optical surfaces

  Müller, Andreas; Mastylo, Rostyslav; Vorbringer-Dorozhovets, Nataliya; Manske, Eberhard

• Challenges in nanometrology: high precision measurement of position and size

  Bosse, Harald; Bodermann, Bernd; Dai, Gaoliang; Flügge, Jens; Frase, Carl Georg; Häßler-Grohne, Wolfgang; Köchert, Paul; Köning, Rainer; Weichert, Christoph

• Application of the metrological SPM for long distance measurements

  Vorbringer-Dorozhovets, Nataliya; Füßl, Roland; Manske, Eberhard